Surachat Gumngen's Discussions (9)

Discussions Replied To (9) Replies Latest Activity

"Sorry I've never used the aluminium european code before, but in the American code,…"

Surachat Gumngen replied Jun 6, 2011 to Capacity reduction of non-Class 1 aluminium cross-sections

1 Jun 6, 2011
Reply by Surachat Gumngen

"Hi, I am not an acoustic specialist, but nornally what I do just check the rough STC…"

Surachat Gumngen replied Jun 6, 2011 to Acoustic performance in glass façades..

2 Mar 19, 2013
Reply by Tony James

"I think there are 2 reasons that your model doesn't converge... 1.your model is unst…"

Surachat Gumngen replied Apr 11, 2011 to Finite Element software doesn't converge in a non-linear calculation..

2 Apr 12, 2011
Reply by Zigor Marroquín Martínez

"Hallo,   I think 100% people can notice! but it also depends on glass configurations…"

Surachat Gumngen replied Mar 29, 2011 to glass thicknesses and colour differences????

1 Mar 29, 2011
Reply by Surachat Gumngen

"Hi Daniel,   You can download indian wind code IS875part3 for free at http://www.iit…"

Surachat Gumngen replied Mar 29, 2011 to Wind loads India

2 Aug 10, 2013
Reply by Harris Imran

"I have a copy of first page only. The results of testing have been shown as I underl…"

Surachat Gumngen replied Jan 25, 2011 to Modeling a laminated glass in a FEM software

6 Jan 25, 2011
Reply by Surachat Gumngen

"If you look the attached paper, it has been shown from testing that both cases behav…"

Surachat Gumngen replied Jan 22, 2011 to Modeling a laminated glass in a FEM software

6 Jan 25, 2011
Reply by Surachat Gumngen

"sorry, I forget to give you a website. http://www.mepla.net/"

Surachat Gumngen replied Nov 30, 2010 to Modeling a laminated glass in a FEM software

6 Jan 25, 2011
Reply by Surachat Gumngen

"Hi Zigor, In germany, we have a special software called SJ-mepla for Structural Gla…"

Surachat Gumngen replied Nov 30, 2010 to Modeling a laminated glass in a FEM software

6 Jan 25, 2011
Reply by Surachat Gumngen

RSS

© 2019   Created by JOSEMI RICO MARTINEZ.   Powered by

Badges  |  Report an Issue  |  Terms of Service